 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||
| Welding in CorelDRAW - page 2 |
 |
Convert this orthographic shape into a top view isometric by applying the following from the Transform Roll-Up "Vertical Scale 86.6, Horizontal Skew -30, Rotate -30. |
 |
Apply an Extrude (Ctrl+E) with these settings: back parallel, VP locked to object, object center, Horizontal 0, Vertical -0.70. If the result is too thick or thin adjust the vertical dimension until it looks right. |
 |
To render: Separate the Extrude Group, click off, select the group and un-group (Ctrl+U). All fills will be Fountain Fills, select the object then (F11). Select the top and apply these settings - Linear, Angle 30, Custom and apply these settings Position 0 = M24, Y82, K18; Position 50 = Y20; Position 100 = M21, Y81, K19. Select the three front shapes and apply these settings - Linear, Angle 60, From = M20, Y40, K60; To = M20, Y40, K40. Select the five side shapes and apply these settings - Linear, Angle 60, From = M20, Y40, K40. To = M20, Y60, K20. |
Home,
About, Contact,
FAQ, Shop,
Products, Services,
Learn, Tips
and Tricks, Tools
© 1997 - 2001 John M. Morris
