 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||
| Rendering Complex Objects - page 2 |
 |
Select the following lettering and apply red from the pallet: PWR, END, and 9. Select SEND and apply a medium to dark green of your choice. Forest Green (C=40, M=0, Y=20, K=60) works ok. |
 |
Around the outside of each button there is a ellipse that is designed to represent the cutout/depression for the button. Select these in turn and apply a fill of C=5, M=2, Y=0, K=90 and X out the outline. |
 |
The buttons may still be Extrude Groups. Select each button in turn and watch the status line. If it is an Extrude Group the Separate and Ungroup all. Once all of the buttons are taken care of apply the following custom radial fill to the extruded part: Angle –60 degrees, Edge pad 10, Position 0 C=0, M=0, Y=0, K=30; Position 60 C=0, M=0, Y=0, K=0; Position 100 C=0, M=0, Y=0, K=50. Then X out the outline. Use (Ctrl+R) to speed up the process. |
Home,
About, Contact,
FAQ, Shop,
Products, Services,
Learn, Tips
and Tricks, Tools
© 1997 - 2001 John M. Morris
