Engineering drawing of a split ring

TDT - Productivity solutions for tech illustrators.

Trimming Objects - page 8

	To render: Separate and un-group the extrude group. Select and fill the top with Uniform Fill C10, M5. Select the front and slot face and apply a Uniform Fill C10, M5, K60. Select both sides and apply a Uniform Fill C10, M5, K20. Select the hole and apply a Fountain Fill (F11) with these settings: Linear, Custom Position 0 = C10, M5, K60; Position 32 = white; Position 100 = C10,M5, K70. Select the screw head cross and fill with black. Select the screw heads and apply a Fountain Fill (F11) with these settings: Conical, Angle 60, Custom with these settings: Position 0 = K70; Position 50 = K20, Position 100 = K60.
	Engineering drawing of a split ring.
	Draw a 2 inch circle by selecting the ellipse tool (F7) and using the constrain (Ctrl) key while dragging. Duplicate (Ctrl+D) the circle and reduce it to about 0.75 inch using the corner handles. Select both circles and align (Ctrl+A) horizontally and vertically, and combine (Ctrl+L) them. Select the rectangle tool (F6) and create a rectangle similar to the one shown then align (Ctrl+A) vertically. Trim the rectangle from the combined circles then delete the rectangle.

	Start		Back	1	2	3	4	5	6	7	8	9	10	11	12		Next		End	Learn More